M&A Interview Questions - Beginner to Advanced Questions
I have a set of M&A interview questions I like to ask.
Interview Questions for Mergers and Acquisitions
In my career, I've only had two analyst / associate candidates answer all four levels correctly without coaching. Most people can get Level 1 and sometimes 2. Fewer get Level 3 or 4 even with coaching. Thought process is more important than answer.
Company A acquires Company B. Assume all numbers below are inclusive of premium and synergies.
Beginner Interview Questions - Basic Accretion / Dilution
Question:
- Company A has PE of 10 and company B has PE of 8.
In an equity-swap deal, is the transaction Accretive or dilutive?
Answer:
Accretive for A. Say A is 8 shares of $10 (earnings $8), B is 10 shares of $8 (earnings $10). A issues 8 more shares, now has 16 shares of $10 with earnings of $18. P/E has gone from $10 to 8.8/8.9
Mid-Level Interviewing - Earnings Yield
This is to break the people who read the Vault guide and quote the "cheaper earnings" answer / shortcut
Strong>Question:
Company A uses debt which has an after tax cost of debt of 5% to acquire B.
- Is the deal still (Accretive / dilutive) like in Level 1 question? More or less?
- What after tax cost of debt would make the deal approximately break even from an accretion perspective?
Answer:
Accretive for A. You're borrowing $80 at 5%, or a cost of $4 to add earnings of $10. It would break even at 12.5% (1/(P/E of B)).
Difficult Interview Questions - Merger of Equals (MOE)
This question requires a framework. If you blurt out a number: A. I bet I know what answer you're going to blurt out and it's wrong and B. you need to show me you put more thought into it regardless: Right number with no backup is the wrong number.
Question: Assume the companies are the same size (read: same market cap) and other reasonable simplifying assumptions.
- Without doing any math, what are some reasonable boundaries for the PE ratio of the PF entity?
- How Accretive is the deal in Level 1 as a %? Is your PF PE ratio within the bounds you expected?
Answer:
It should be between 8 and 10. As per your answer to Level 1, it is slightly lower than 9. Basically, if B is negligible (ie doesn't move the needle), you would expect the PE not to move (be closer to 10). If the transaction is huge, the PF entity would be closer to the target so closer to 8. Close to 9 is not a bad guess, especially if they are the same size. This is a good lead in for the Level 4 question.
Common Mistake: The first mistake I get is people averaging PEs which is NOT right. Try to find the right framework to get to the actual % accretion (Part B of this question). Once you have that, figure out the PF PE and see where you land.
You can learn more about Merger of Equals below:
High Level Interview Questions - Full Merger Math
If you have the framework for Level 3, chances are you can probably get this one too
Question: Assume company A is twice the size of company B (read: market cap A = market cap B x 2).
- Without doing any math is the deal more Accretive or less Accretive? What are the PE bounds in this case?
- Now do the math and tell me exactly how Accretive it is. Does your answer make sense?
Answer:
It will be less Accretive because the company that's making it Accretive has a lower weight. Say A has earnings of $16 and is $16 shares of 10; they have to issue 8 more shares to make the purchase and now have a market cap of $240 and earnings of $26; $234 would be P/E of 9 but it's higher, so ~9.25
Preparing for Investment Banking Interviews?
The WSO investment banking interview course is designed by countless professionals with real world experience, tailored to people aspiring to break into the industry. This guide will help you learn how to answer these questions and many, many more.
Investment Banking Interview Course Here
Mod Note (Andy) - This one was originally posted 8/16/2015.
Thanks for posting this.
I'm still in the middle of technical prepping, so I had to do these with pen and paper. Is this normal/expected/acceptable for an Associate interview? I'm usually pretty good at mental math but accretion/dilution thinking is still new for me.
Accretive for A. Say A is 8 shares of $10 (earnings $8), B is 10 shares of $8 (earnings $10). A issues 8 more shares, now has 16 shares of $10 with earnings of $18. P/E has gone from $10 to 8.8/8.9
Accretive for A. You're borrowing $80 at 5%, or a cost of $4 to add earnings of $10. It would break even at 12.5% (1/(P/E of B)).
It should be less than 9; you can't just average the P/Es, think about it as averaging the earnings and what that would mean if the market cap was the same (market cap of $80 and earnings of $9 = P/E of less (This is only a guess after having done the math; but I think there's some truth in not being able to add/average P/Es, even of same-size companies).
It will be less Accretive because the company that's making it Accretive has a lower weight.
Say A has earnings of $16 and is $16 shares of 10; they have to issue 8 more shares to make the purchase and now have a market cap of $240 and earnings of $26; $234 would be P/E of 9 but it's higher, so ~9.25
Pen and paper is ok for Level 3 and 4. Would be expected to do Level 1 and 2 without.
Correct.
Also correct.
I would relax your boundaries and say that it should be between 8 and 10. As per your answer to Level 1, it is slightly lower than 9. Basically, if B is negligible (ie doesn't move the needle), you would expect the PE not to move (be closer to 10). If the transaction is huge, the PF entity would be closer to the target so closer to 8. Close to 9 is not a bad guess, especially if they are the same size. This is a good lead in for the Level 4 question.
The first mistake I get is people averaging PEs which is NOT right. Try to find the right framework to get to the actual % accretion (Part B of this question). Once you have that, figure out the PF PE and see where you land.
General comment: You've talked to me about aggregates (at the corporate level, net income), but what is the effect at the shareholder level (EPS)? What are the exact % accretion? That's why you could be allowed paper for this question. Could also technically do without if you can keep the numbers in your head.
The only way to get the exact number correctly is to use a framework to structure your thoughts.
Thanks, my first thought was between 8 and 10 for #3 but I thought you wanted something more specific.
For #4, EPS was $1 pre-acquisition in my example (16 shares, $16 earnings), and is ~$1.083 post-acquisiton ($26 earnings, 24 shares), so it's 8.3% Accretive (or 1/12).
For #3, EPS was $1 pre-acquisition and $1.12 post-acquisiton, so it's 12.5% Accretive (1/8).
I'm not sure if I understand what you mean by framework; I had on my paper an easy way to look at the pre/post acquisition market cap/# of shares and earnings, which made it pretty easy to go from #3 to #4.
A good reminder that I need to remember to answer all parts of a question...
Thank you for the questions - very helpful
I have a basic question regarding the financing impact on the P/E ratio For level 2 question, a company issues debt to acquire company B. It is expected to pay interest at the end of the year and not right away. That said, should we deduct interest expense when calculating proforma earnings?
When calculating P/E ratio, do we usually calculate the P/E(fwd 12mnths) or P/E(current Earnings)?
Thank you
.
I say framework because the numbers can always change or you can be given different pieces of information (I could have nailed down A's market cap and Net income instead of just giving you PE and letting you make up your own numbers).
For instance, what if I had said A had Market Cap of $1000 and Net Income of $100? Or A is trading at $10, EPS of $1 and there are 100 shares? Or what if I didn't give you the # of shares? Notice that all the information is consistent with the information I provided in the question.
The key point is that in a short period of time in an interview, if someone throws a few small twists, you should still be able to handle the math.
Makes sense, I think the way I did it was still pretty adaptable, but hard to explain more without pictures of my work.
Thank you so much for providing the questions and such detailed feedback on my answers.
For level 3 and 4 don't you need the debt to equity ratios for part B of both?
Not really. If you make a simplifying assumption that you can assume the debt that is raised is either rolled or re-financed at a similar rate.
.
Best thread this month. Level 1&2 simply no need for math. Level 3, I knew average was not the way to go and considering the weight was more understandable so level 3 so not that hard. Level 4 b got me twisted. Can you pls explain with an example. Thanks
Here is my solution / framework for Level 3. You can use it to solve Level 4.
Step 1 - Describe Company A's Shares No debt EPS(A) = $1 (by definition - PE of 10) Assume 100 shares
Step 2 - Describe Company A as a Whole Mkt Cap = $1000 Net Income = $100
Step 3 - Describe Company B as a whole B's Standalone Share Stats don't matter as equity / cap structure gets wiped in acquisition.
B's Aggregate (Company) Stats: Mkt Cap A = Mkt Cap B = $1000 (This is given. For Level 4 - you just make this half instead. You can adjust for any ratio / size) Shares of A issued to B = $1000/ $10 = 100 Net Income = $125 (Mkt Cap of $1000 divided by PE of 8)
Step 4 - Describe PF Company A as a whole PF Mkt Cap A = Mkt Cap A + Mkt Cap B = $2000 PF Shares of A = 200 PF Net Income A = Net Income A + Net Income B = 225
Step 5 - Work back down to PF A Shares Price per share = $10 EPS(PF A) = $225/200 = $1.125
$ Accretion / share = EPS(PF A) - EPS(A) = $1.125 - $1 = $0.125 % Accretion / share = EPS(PF A) / EPS(A) - 1 = ($1.125 / $1) - 1 = 12.5%
What got me confused is when you said assume the same EV in level 3. I began to think about various combination of both company A&B capital structure which made it difficult until I saw that you assumed equity value are the same, hence the assumption of no debt you made at the beginning.
I was going mad because I have studied the crap out of technical and experienced some deals .It would be very depressing to miss or have no idea about the question.
Thanks for detailed example.
NA
Maybe I am reading this wrong, but two scenarios. Scenario 1 Co. A Equity 10$ Earnings 1$ 10 Shares 1$ per share EPS of .10$ P/E of 10
Co. B Equity 8$ Debt 2$ or Debt/Equity of .25 Earnings 1$ 8 Shares 1$ per share EPS of .125 P/E of 8
-Both have same Enterprise Value Co A aquires B Equity of 18$ Debt of 2$ Earnings of 2 18 Shares 1$ Per Share EPS of .1111$ PE is 18/2 or 9 Accretion of (.1111-.1)/.1 = 11%
Scenario 2 Co. A Equity 10$ Earnings 1$ 10 Shares 1$ per share EPS of .1 P/E of 10
Co. B Equity 4$ Debt 6$ or Debt/Equity of 1.5 Earnings .5$ 4 Shares 1$ Per Share EPS of .125 P/E of 8
-Both companies have same Enterprise Value Co A acquires B Equity of 14$ Debt of 6$ Earnings of 1.5$ 14 Shares 1$ Per Share EPS of .10714 PE is 14/1.5 or 9.3333 Accretion of (.10714-.1)/.1 = 7.14%
It seems that you need the D/E or maybe I just misread your instructions or maybe I just haven't learned anything from the CFA institute.
Blackstone M&A interview, what are they looking for? (Originally Posted: 10/11/2006)
I've got interviews with Blackstone, Greenhill, Evercore, and a few other boutiques coming up. I understand that these guys like asking brainteasers, guestimation questions, and financial questions. But what are they looking for in terms of fit?
No, you are right. I normally simplify by saying market cap is the same or make the simplifying assumption that they have the same "optimal capital structure" (that the companies are otherwise identical). I said EV was the same in this case. So you are right. Which is a good point that you need to make assumptions about the debt to equity mix.
someone they can stand to be around 80 hours a week
I think I read somewhere that Blackstone was going to double the size of its M&A group in the next few years...maybe hiring will be more lenient.
Associate ib interviews (M&A and others) (Originally Posted: 01/18/2007)
What are associate IB interviews like (coverage groups)? Has anyone here had any experience with associate level interviews for M&A groups?
I would like to know. I've only been on associate level interviews with one bank and it was for their real estate principal investment team.
Thank you for posting this. Great conceptual questions.
bump.
any thought on the above?
M&A interviewers are in general more technical and demanding than other areas of the firm.
On the style and mood of the interviewer. If your background is quantitative, and your prior work experience and educational background is solid, your interviewers will likely focus more on fit, how polished are you, and do you know what you are getting into, versus technical skills they would expect to teach you on the job.
thanks guys.
I'm not worried about fit too much. however, i might end up with a group that advises on different sectors than what i'm used to (general M&A vs. Real Estate Private Equity, which is what i do).
any input on the kind of technical aspects that they might as about?
thank you, these questions and the answer framework were extremely helpful
M&A Analyst Case Study for Interview (Originally Posted: 04/19/2007)
I am interviewing with a boutique for an M&A analyst position.
I have been asked to come up with a pitch book for an LBO of a tech company by private equity, I don’t have to worry about the financing part my focus is really more on valuations.
As I do not have any experience doing this, I was hoping to get some help from here.
I am supposed to analyze a company to see if it is overvalued (undervalued), revenue sources, any units with locked up value and what kind of return private equity can expect from the transaction.
I am not really looking for the answers of the case I have to work on but more so looking for hints and tips, what works, what doesn’t and maybe a short outline?
I would really appreciate any help!
SF? NY?
does it really matter?
No, it doesnt matter, but its probably sf anyways cause its tech.
I interviewed at several boutiques in sf and wasnt even asked a single technical question in any round at any bank. what a ridiculous thing to ask for.
its actually in San Diego, not sure why they asked for something this technical...
It's not that ridiculous. It lets them know
you get the idea
are you going to take the job? had a similar interview last year, but the job had the M/A title and company talked about how much bonuses analyst can make 100K+ but at the end of the day it was pretty much cold calling. good luck and i would love to hear how it turned out!
Round 2 interviews coming up this week. I will let you know how it goes.
so did u come up with the answer to your post to get to round 2?
Update: so I did R2 today and it went really well.
I put my answers in a PowerPoint which scored points!
I had one slide on the M&A company 1 slide as an overview of the target company 1 slide analyzing financials 1 slide on valuation
He asked for referrals and will call me within a week or so....
Anyone know of good and bad things about working for a startup M&A advisory boutique?
Any questions I have to ask?
Anything I should look out for? (good or bad)
no suggestions? anyone? Good/Bad?
keep applying to places just in case this thing doesn't work out.
Btw, another piece of advice. Know certain reciprocals by heart. Saves the need for a calculator.
1/6 = 16.7% 1/7 = 14% (15% ish) 1/8 = 12.5% 1/9 = 11.1% 1/11 = 9% 1/12 = 8.25% 1/15 = 7%
PE of 9 has ke of 11.1%.
If you use simple numbers (mkt cap of 1000) this can help your math. You might even be able to do without paper.
Merrill Lynch Tech M&A Interview (Originally Posted: 10/18/2007)
All,
I might have an interview with the Tech M&A group at ML very soon. I have searched for information on the group on the forum and found some information but not a whole lot.
Does any one know where I can look for ML's M&A deals in the past year, especially in tech? If you know anything about the group please share.
Thanks. PELBO
Is this with the Palo Alto office?
ML's Tech M&A has done a few deals recently that are worth looking into. They advised Postini's sale to Google (650mm?), as well as RFMD's purchase of Sirenza (900mm). Expect the questions to be very technical. Small group w/ around 5 or 6 analysts but good deal flow. PM me with anymore specific questions about the PA office in general.
Thanks all for the feedback. If others have more specific deal/group information, please do share.
Pelbo
umm are these kind of questions common for entry level interviews?
M&A Interview question - Breakeven (Originally Posted: 12/18/2007)
During a finance interview I got the following question:
Company A has 120$ of Net Income and a P/E of 10. Company B has 10$ of Net Income and a P/E of 30. Taxes are 40%
What is the breakeven price to avoid dilution if A wants to buy B.
I am not sure I recall everything right or if he was supposed to give me more details but I assumed that you just needed to apply the P/E to the new target income and therefore say that you could buy it up to $100 (Keep P/E of 10 and apply it to target NI). However can someone explain if you have to go back to pre-taxable income ? How are we suppose to use the tax rate here?
Can be. I had a buddy get asked up to Level 3 for a second round. It depends. Your interviewers can always push you. I'd say Level 1 and 2 are fairly common for first round.
I don't think you need to use the tax. I believe the max price to avoid dilution is $100 per share. I would give an explanation, but I'm not sure if it's right. If someone confirms that I'm right, I'd be happy to explain how I did it.
If you assume you pay by cash (this is the reason why they give you the tax rate, see below) Let's note X the amount you will pay, you will have to borrow X at the cost of debt which we assume is 5%. The cost of debt after taxes is 5%(1-40%)=3% because the interests costs are deductible Pro-forma net income = (120+10-3%X)/Number of shares Since it's a all-cash operation, the numnber of shares remains the same, therefore the breakeven price is when 10-3%*X=0 so X=300
Then if you assume you pay with shares, you don't need the tax rate and your answer seems good
(I know it's not traditional, but:) What if you assume that you purchase the company with existing cash on hand. Would the calculation then be the same as an all stock purchase of the company, yielding a purchase price of $100 (if you want 0 dilution)?
Assuming an all-stock transaction and no other complications (e.g. no synergies, no increased amortization, etc.), the breakeven price is indeed $100. Very simply, the transaction will be breakeven when the P/E of the target matches the P/E of the buyer. A P/E of 10x for Company B implies a Price of $100 (10 * $10 NI). Note that this is a signficant discount (67%) from where company B is currently trading (30x).
The tax rate is irrelevant in the above scenario. Tax rate will only come in to play if this is a partial or all-cash deal or if there are other adjustments that need to be made to proforma net income (like those synergies or amortization).
further to Londoner's post, in an all-cash transaction with 5% interest rate, the breakeven purchase price should be $333, not $300. Note that this is analysis is highly sensitive to the interest rate.
Yes, you'right, sorry. 10/0,03=333
Response to waanabebanker, no it's not the same as there is a cost of opportunity when using the cash you have on hands, and we generally assume this cost is the same than the cost of borrowing
don't worry Londoner, I won't tell your associate :)
You may want to be able to quickly prove out your $100 conclusion, rather than just say "apply the 10x PE to the target NI". Make it easy by assuming 1 share outstanding of A and determining that paying ~0.0833 shares for the target will keep the the PE at 120 with the acquired net income (mkt cap of $1200 x 0.0833 = $100).
whoops. should have said "PE at 10" in last line
Great explanations, thanks a lot guys
ok, I'm assuming that the question is asking P/E dilution or mkt cap/earnings $333 would only be correct price if we are assuming market cap of the company doesn't change post all cash transaction. post transaction P/E = (1200 + X) / (120 + 10) = 10 ---> X = 100 (stock purchase, pretty straight forward.), same result as earlier post.
Cash purchase
P/E = (1200 + X1) / (120 + 10 - X2 * 3%) = 10 ---> X = 77M where X1 = additive mkt cap effect of target post transaction, X2 = price paid for the target. If X1 = X2, as it theoretically should assumming no synergies, then X1 = X2 = 77M. If you set X1 = 0, then X2 = 333M.
It would make sense if you think about this intuitively, if you're paying interest post-merger thereby reducing your post merger earnings, then the price you'll be paying for the company has to be reduced for P/E to stay the same. $333M seems to have illusion of working (it works mathematically at least) is because you're negating the additive earnings effect of the target ($10) by paying the price such that the interest payment equals earnings ($333M*3%=$10M).
The price you're willing to pay for stock purchase and cash purchase obviously differs due to tax basis, interest tax benefit, and a host of other reasons, but if it changes the number by more than 3X (not saying it's not possible, I've seen it happen albeit not too often), you should always double and triple check your logic. Or your associate will catch that mistake anyway, so no harm done.
Having said that, the question isn't a very good one, typically you worry about diluting book value per share, not P/E. Price unpredictably moves around all the time, especially post merger depending on how people view the transaction, and when you are buying a company you don't tell the target's advisor that you're only paying a certain amount because your P/E is so and so. It's like saying I'm only gonna pay you $40,000 for your ferrari because my last car purchase was 10% of my salary, and so 40K is that 10%. In all honesty, mgmt do ask dumb questions like "i want to keep my P/E the same post merger." especially smid cap mgmts who don't have much deal experience. then you say, P/E should rise post deal as market will react positively to the great synergy possibilities for the two companies. Then tell'em to focus on book value per share discussion, which is far more important as it naturally leads to discussion on how you want to fund it (equity or debt).
Good question or not, it is a pretty common interview question
Dilution/accretion are definitely something bankers and management look at and it's one of the first thing you communicate to the markets. It is not a measure of value creation but it's a way to warm up the markets about the transaction. And as an IB analyst, you will have to build this kind of small model very often. Of course, this example is simplified (no synergies/ restructuring costs for instance) because it's an interview question..
Are we assuming NE * PE = MktCap = Break Even Price since only 1 share of the company exists?
I'm going for FT and I had no idea what to do with this question until I read the posts. Are these the type of things you naturally pick up at work?
Wow! I do business valuation and spent some time this summer teaching my son, who is going into his second year at USC and wants to go into I-banking, some valuation principals but we were doing CAPM, dupont/ratio analysis and adjustments to get normalized income and from NI to FCF. Sounds like he'll kill it when the time comes
M&A specific interview questions (Originally Posted: 01/16/2008)
any ideas on the best source to get some tough quant questions for M&A interviews that is not Vault or WetFeet?
Thanks
wow you and your son sound like a blast!
Crack, Timothy Falcon, Heard on the Street: Quantitative Questions fromWall Street Job Interviews, Crack, 2007
Anybody have any recommendations on books you can read to learn this kind of stuff? Appreciate the help.
Blackstone Corporate Advisory M&A Interview and culture (Originally Posted: 01/28/2008)
Has anyone gone through it?
Highly technical? what do they look for?
What's the culture like, especially for the Boston office? Similar to Lazard/Greenhill?
Technical as hell- good culture- some of the guys I met were very personable. I got dinged at the door in technical- huge emphasis on EV, LBO, valuation in general. I would say that they, just like in any other BX group, care more about what you know than you as a person, in the first round.
did you interview for advisory or PE?
All three divisions- PE, M&A, Restructuring
BX Restructuring and/or M&A is in line with MS M&A, GS TMT, UBS/CS LA
expect a tough interview..
yes, highly technical. very smart guys. just make sure you have your stuff down. understand the finance, rather than just memorizing it.
has been very different. I wish I had had a technical interview. Instead, I spoke with two people and it was purely blah-blah-blah... Strange experience overall...
I interviewed in the same day with M&A Restructuring and BAAM and found that the M&A and Restructuring were the standard accounting and finance questions that are easily prepared for
They asked the "negative equity" question which was a little different and the M&A guys also asked 7^3 and that fu&king clock question but other than that standard
pretty weird dudes tho, btw....harvard, princeton, etc. not the socially optimal level of intelligence
Got a summer offer for BX Tech M&A (Boston) last spring. Really small group, seemed like very sharp guys who worked very hard. Heard solid things about exit opps for the Boston + NYC advisory groups (although not as strong into BX PE as I would have hoped, but other top PE firms seemed common). Got a bit of a bad vibe after getting the offer... they played some slightly shady games.
I turned it down for an MBB consulting gig, because I wanted to do more strat, less finance, and didn't want the 100 hr/week lifestyle. But I'd recommend the group to someone who's thinking about banking - looked like you'd get great exposure to senior people (who will definitely help you advance your career).
Thanks for this, awesome post. That said, I have a conceptual question for the M&A guys (which I am certainly not): I get the point about Company A buying cheap earnings, and thus getting an increase in EPS (aka Accretive), but at the same time the P/E has gone down, meaning as a shareholder, I can now sell my shares at only approx. 9x EPS, so depending on exactly the EPS amounts and relative sizes of the companies, the value of my shares may have increased OR decreased, no?
M&A Analyst Interview Questions (Originally Posted: 05/20/2008)
What are some typical questions that would be asked by a Middle-Market Capital Advisory Firm? I'm applying for the Entry-Level M&A Analyst Position. What are some buzz-words to know?
Any perspectives from those within an M&A Advisory firm?
Good question. So the logical follow up is "why is accretion important"? In reality, accretion is a bit of a bull shit number. Value is only truly created through synergies. Sometimes a 5x business is only worth 5x. Even if an 8x business acquires it, if no synergies exist the deal may be Accretive, but no value is created.
One of the key assumptions I made was that the PE's already had premium and synergies built in (to keep the math simple). What happens in real life is that synergies create value in the deal and are split between buyer and seller through premium.
Redo the question above, but now assume that premium is built into the PE, but synergies are not. Assume synergies increase B's net income by 30%. How what does the math show? (in this case, B's contribution to A's PF equity value if you assume the PE remains constant) should increase by 30% (not a super robust assumption, but close enough... some value is created) then this value is shared pro rata via ownership splits. So imagine equity value goes from $1000 to $1300 and PF A mkt cap goes to $2300 but A and B own equal shares, then A's implied share price over 200 shares is now $11.50 and your value accretion per share is $1.50 or 15%. Another way to look at it (mathematically consistent) is that the deal creates $300 in value which is split evenly between A and B ($150) divided by A's standalone shares of 100 (or $1.50 value accretion).
If you overpay for a business (pay premium of $400 when only $300 of synergies are created) it can also be value destroying to A shareholders.
... Doing some shorthand math in my head, I think A's share price will only increase if it purchases B for a PF implied multiple of B (with premium and synergies baked in) that is cheaper than B standalone (what you got was "cheaper" than what you paid for it on a PE basis).
Very similar to BB M&A interviews from my experience. Make sure you know valuations down cold. I also had a case study involving a valuation using Excel. Had to calculate key financial ratios (current, turnovers etc.) and working capital. Best of luck.
I see you're in San Diego. PM me. I think I have a good idea who you're interviewing with.
i got asked about beta and how it would differ based on the different firm profiles and business types.
If just looking at P/E, I think a pretty easy way to go about it using relative size is to use weighted average "returns" (E/P) rather than going through the whole framework of NI, EPS, Market Cap, and what have you. For #3, this means averaging 10% (reciprocal of 10x) and 12.5% (reciprocal of 12x) to get 11.25% (reciprocal of 8.9x [if doing on paper, just below 9 since 9x would be 11.1%]). Similarly for #4, weighted averages of 2/3 * 10% (6.7) and 1/3 * 12.5% (4.17) would yield 10.83% (reciprocal is 9.23x, kind of hard to do on paper). The % increase in returns are clearly 12.5% and 8.3% respectively (this would get harder if Company A had a P/E other than 10x), and that's also the % increase in EPS (algebraic proof: if E/P values are in a certain ratio, then EPS's will be too since you're multiplying by a constant, price).
Interview Tips - Associate Switching to M&A? (Originally Posted: 03/08/2009)
Hey all - I have a finance interview 2 weeks from now at an M&A group at a middle market bank for an Associate job. I've been working in IB for a few years, but have more of a lev fin background and haven't worked in M&A before. Closest experience is working on a few LBOs, but haven't done anything strategic. I feel I'd do fine with DCF and valuation questions, but is there anything specific to M&A that I should be prepared for? Trying to figure out what "typical" questions people would ask at the Associate level in M&A. Thanks...
You are absolutely right. But take a look at why weighted averages work in this case. If you weight the average by size like you suggest, you are using math that is mathematically equivalent to using the frame work. Using weighted averages is just my way of moving to aggregates from per share values Step 1 to Step 2 and back down to per share values again from Step 4 to Step 5. It's not a bad shortcut.
Your math is 100% correct. But again, I would suggest the point is to demonstrate you know what's happening, the thought process etc. It's nice in an interview to hear the candidate use the right terminology. It's not just about getting to the right answer.
Plus if things get more complicated (like littleredman suggested by changing up the debt to equity mix, using weighted averages become a bit more complicated.
For sure, and I actually did the "full" way out in Excel to confirm. I think the method people take is probably going to be suited to the tone of the interviewer. If he's asking it with a rapid-fire tone urging a fairly quick result (P/E or % accretion or whatever), then I think the scratch way to do it works. Like you said, though, some interviewers will want to walk through the full paper merger model, so it's definitely a useful underlying framework to understand why the shortcut works. Great post btw
Be prepared for questions regarding synergy models and acc/dilu...
The answers have been revealed but I thought there were concise ways to look at like.
1. Accretive for A since you're using a more expensive currency of share A to buy cheaper shares of B. (Not sure if there are more eloquent ways.
2. Accretive since you're buying B by 5% cheaper. The breakeven would be B's cost of equity at 12.5%
3. If the companies are the same size, B has more earnings than A does. Thus, it won't be an average - it would be if they had same earnings. Because B has more earnings, it'd be weighted more closer to 8 than 10 so the reasonable bounds would be between 8 and 9.
The accretion would be 12.5%. I think there's a short cut. EV doubled but there was nothing transformative about A. B experienced a "multiple arbitrage", going from 8x to 10x, which is a 25% accretion. Total accretion for A' would be (1/2)*(25%) = 12.5%
4. It would be less accretive, and >9 as A is more weighted now in the combined company (the fact that A has more earnings). Thus, the accretion would be (1/3)*(25%) or 8.33%.
M&A Interview (Originally Posted: 12/02/2009)
I have an upcoming interview with a BB M&A group and wanted to see if anyone could provide some tips. I've gone through the ib interview process before, but never specifically for M&A. How technical? Which terms should I brushup on? I have been working for a few months since graduation, should I mention my current employer would happily discuss my performance? Thanks.
Edit: As someone mentioned before, yes you definitely need to assume what D/E is otherwise, the math is off. I assumed D=0, and I think that's what the OP intended.
I would suggest being able to discuss the recent uptick in M&A activity and the expectation for continued deals in the space. Definitely know a few deals backwards and forwards (e.g. companies involved, control premium, cash vs. stock vs. debt vs. some combination of these, whether the deal is Accretive/dilutive for the buyer, rationale/synergies driving the deal etc). I would also be able to walk your interviewer through an accretion/dilution analysis (e.g. what happens if the P/E of the acquiring company is higher than the target etc). There is a great article on www.ibankingfaq.com, a site run by a regular WSO poster, that gives a great synopsis of the topic. I had a brief phone interview for a top tier M&A group (think MS/JPM) and the interviewer asked me to walk him through any finance topic of my choice, so maybe be prepared for something like that. Since you mentioned that you have been working a lot, be prepared to discuss some of the deals that you have worked on. If your deals are M&A based rather than capital markets transactions, be able to discuss any modeling you did as well as the multiples and unique aspects of the deals. And to answer your last question, maybe only discuss if it is brought up by your interviewers? Frankly, I'm not sure how to handle this topic. Hope this helps.
1) Walk through a DCF
2) Understand the differences between Perpetual Growth & Exit Multiple Method for calculating a TV
3) Talk about accretion vs. dilution
4) Talk about a recent M&A transaction (dilutive? , strategic or financial? , other industry trends)
Read this book if possible... http://www.Amazon.com/Investment-Banking-Valuation-Leveraged-Acquisitions/dp/0470442204/ref=sr_1_1?ie=UTF8&s=books&qid=1259778233&sr=8-1
Please check your pm. Thanks
Hey guys, from all of the things you are saying to be prepared for, how do you get that info?
I read the journal and all and follow deals on websites but I never really see any in depth insight on the deal like stock vrs. debt, control premium, etc. I am an undergrad. I wont have to know any of the accretion dilution analysis will I? not all that familier with that.
Usually, most analyses of deals include a brief discussion of a premium and the general details of the deal. Take a look at the link below for a Dealbook report on the recent Baker Hughes/BJ Services merger as an example. As for the accretion/dilution stuff, I would definitely recommend having a good handle on that even as an undergrad. At the very basic level, you might get asked whether a deal is accretive/dilutive based on the P/E ratio. However, being able to give an in-depth answer on the topic might make you stand out from other candidates in an interview. These sort of questios are rare in SA interviews (from my experience) but may and definitely do arise during FT recruiting or if you're directly interviewing for an SA position in the M&A group.
http://dealbook.blogs.nytimes.com/2009/08/31/oil-services-company-to-bu…
Expect the interviews to get very technical. I had several M&A interviews with BB's, and even with no finance background, I was expected to be able to do DCF's using WACC's and some simple comps, in addition to knowing basic accounting. And be sure to know beforehand some recent deals that the bank/group has worked on.
Do the interview guides (WSO, BIWS) cover these types of questions? I most likely would've gotten that wrong.., but then again I just started the M&A module in BIWS. Just purchased the Interview Guide and curious to know whether or not a question like this will be covered in there.
BB M&A Interview (Originally Posted: 02/09/2010)
Have an interview coming up in about a week at a BB in their M&A group. What are some of the questions I should expect?
Get the Vault + WSO + Beat the Street guides
Also see ... http://www.ibankingfaq.com/category/interviewing-technical-questions/di…
thanks squawkbox...anyone have M&A interviews recently and get some odd questions?
what's your background - junior going for SA stint, lateral move?
if you're a lateral, you should know how to drill down on the following technicals:
Accretion / Dilution analysis Walking someone through a M&A model Strategy (current event may be helpful i.e. Cadbury / Kraft) Purchase accounting m&a process (solicitation, auction process vs. exclusive sale, negotiations,
Vault can help you somewhat, beat the street from wetfeet - not really helpful. i haven't seen the wso guides so can't really comment.
if you wanted to purchase or read something: ibankingfaq.com is a good start, for most of the technicals - "investment banking: valuation, leveraged buyouts, mergers and acquisitions" is pretty solid.
im a lateral... thx for the response. Are brainteasers common for these interviews?
Interview for M&A intern (Originally Posted: 04/14/2010)
Hi guys,
I got an interview for an internship at Lazard for an M&A position. Now I was wondering if anybody has some ideas on questions etc that might be discussed during such an interview.
I think they can be narrowed down to three main topics which are: 1. Personal experiences 2. Company fit 3. Technical questions
Could you maybe give me some examples of questions which I might get during the interview as well as which technical stuff I should master for sure!
Thanks in advance.
Hello. your post prompted me to look into this accretion/dillution stuff. i've answered the first two questions by being as general as possible and by showing what assumtions have been made. for example for the first one if my calculations are right then it's not sufficient for PE(A)>PE(B) if there is a control premium. Can you also please explain what PF means, that's what blocked me in question 3/4 thank you
http://postimg.org/image/bofdex7t5/
You are correct about control premium, however, that's why I mentioned as part of the assumptions that premium and synergies are included.
PF is shorthand for "pro forma", latin for "as a matter of form". It basically means the information is presented on an "as if" basis.
Also, can tell you are very comfortable with math as your notation for your proof is very clean, but I think I need to red flag a potential error in your math. In your proof for Level 1, step 3 you say: The post-acquisition EPS'(A) = (E(A) + E(B)) / (#A + x)
The error here is you are adding EPS when you should be adding net incomes (EPS' in aggregate). You'll notice that is the primary purpose of the level 3 question. I know it's nit picky, but you have to be very precise with your language.
Also, as a piece of advice, level 1 and 2 questions don't require as robust a math proof as you provide. You have to understand that IBD is a FO position so you have to be able to explain concepts in simple terms. The interview is as much about how you present as well as getting to the right answer.
Actually E(A) & E(B) denote the Earnings of A & B respectively and not their EPS which are always called EPS in my proof. To me the new EPS is equal to the sum of earnings of A & B divided by A's new number of outstanding shares. is that wrong ? would be weird if it wasn't correct since i did get to the condition PE(A)>=PE(B)
Thanks for the explanation on what PF means. i'll answer the other questions shortly. Your post has been very instructive so thanks :)
Lazard is a pretty decent firm so nice job
ive heard they are technical
What country is this? I have a feeling you are not in the US.
I interviewed intern candidates earlier this year for an elite boutique. Generally (and I did tailor to each candidate's CV) my questions were in the following categories:
1) Do you know what this job entails? What do you think makes you suited to this job? (please give examples if possible from your experiences to date)
2) Why this firm? Where else are you applying?
3) Valuation - and this was tailored to candidate's experience (i.e. one guy had real estate investment exposure so I asked him about key sector specific metrics when dealing with comps for example)
4) Wider strategy / commercial aptitude - for example, one candidate had experience at a PE fund, so I asked him how a PE firm generates returns, specifically what a PE firm would look to do with a business (e.g. operational improvement, buy-and-build etc. etc.) and routes to exit
In terms of expectations, candidates needed to be able to deal with 1 and 2 without any blips. Candidates were expected to be able to go through the 3 most used methods of valuation (trading / transaction comps and DCF). 4 was then used to let the really good candidates differentiate themselves.
Hope this helps.
Thanks guys! Indeed I am not from the US but from Amsterdam...indeed the city where we all get fucked up all day long ;-)
Another question, I know how to deal with the 3 most used methods of valuation but could use a little bit more insight into how/where a sector specifically influences the valuation and method used, any idea on where to obtain this info?
Citi M&A final round interview (Originally Posted: 05/31/2010)
Got a final round assessment centre with Citi m&a in London on Wednesday, for the full time analyst grad program starting this summer. Its a last minute assessment centre obviously as its so late in the recruiting calender, so I'm hoping there are not too many candidates.
Anyway first question is that my application says my first choice is 'corporate finance/m&a' so does this mean they are interested in me generally or for a particular group? In my first round of finance interview, I had an associate from healthcare, and then an associate or VP from a group that he described as 'linking the sector teams to the ECM or trading desk', which he described as working on IPO's and placements. Can anyone shed any light on the latter group?
Secondly does anyone have any general advice for Citi interviews? Preferably London although I guess its mostly US guys on here so any help would be appreciated.
Thanks.
Hi, TorontoMonkey1328. Thanks for the questions. I am studying for summer analyst positions in Toronto, and I was wondering, how in depth do we need to know Accretive/dilutive concepts? I've never heard about it in my finance classes, so I couldn't even get past Level 2. Are these the types of questions I should be focusing on more? Thank you.
The London SA ACs went down like this (not sure if the FT one will be the same though ..)
As for your first question, this late in the game, it's likely that there is a specific group with a hiring need (perhaps ask your interviewers which groups still need people).
I had my final round interview at Citi M&A in london just recently for the full time position July 2011. the structure is exactly as Brown_Bateman detailed it... it was also very technical (but im not sure if thats just because of my previous experience in M&A)
Thanks a lot Brown, thats really helpful.
Can I ask where you got that quoted post from? Appreciate your input above as well.
My fb inbox.
Hi, just thought I'd bump this in case anyone has any more advice/info for me before the big day tomorrow!
Thanks.
Hey buddy, mind sharing your experience of the AC? Thanks!
LAZ & BX M&A Interviews (Originally Posted: 09/10/2010)
Has anyone been through interviews with either LAZ or BX M&A? I hear that they are much different and more technical than BB interviews and that there's less of an emphasis on qualitative questions. What is the process like? What sort of technical (M&A, accretion / dilution, LBO) questions do they ask?
I don't know where you got your information on Lazard, but the only interview I ever had there was with the Head of Investment Banking, and we talked about Freakonomics the whole time.
I got the job.
Generally, senior MDs don't ask technical questions. They don't care that you don't know (nor should you). Lazard will teach you what you need to know and how they want you to do things. It's more important that you got laid in college/b-school than if you know how to do a back-of-the-envelope lbo model.
Just be yourself. If you don't fit in with Lazard culture, you won't get the job. And you'll not like it if you don't fit in, so don't try to be something you're not. I don't suspect you would have got the interview in the first place if you didn't attend Harvard, Wharton, Princeton, Stanford, Yale, or (cough) Columbia in the US. And in London, if you didn't go to Oxford, Cambridge, LSE, Imperial, Durham, Warwick or Edinburgh, you wouldn't make it past the milkround. You write like an American, so I am guessing you're interviewing in New York.
Be prepared for technical questions only from juniors. Why? Because juniors haven't interviewed too many people in the past, and tend to forget that they didn't know anything either when they were on the other side of the table.
I have also interviewed at BX, but for BAAM, not M&A. The interviews there are also almost entirely fit-based, so good luck.
There's a posting from Lazard IBD in my school and I do not go to one of the schools you mentioned in the US.
Awesome, thanks for the insight - surprised to hear that your interviews weren't technical though. What kind of personality would you say fits in well at LAZ or BX M&A?
Definitely agree with this. I had a final round there and the senior guys didn't ask me anything remotely technical, whereas the junior guys did. Not more or less technical than other places, except that the interviews weren't as structured like they were at bigger banks. That being said, I'm sure if you have a finance/econ/math background then they will ask more technical questions, whereas if you are an art history major they won't expect you to know much along the lines of finance/accounting (and yes, there are art history/English majors working there).
^ You know those places recruit other than your mentioned schools.
Since when was Durham placed in "target" status?
It's not unheard of for Lazard to recruit outside of the schools I listed, it's just not that common.
We can include UChicago, Northwestern, Berkeley, CalTech, Rice, UTAustin, Dartmouth, Brown, Cornell, etc (as Lazard now has a middle-markets team that is more geographically dispersed). In the UK, BX and Laz don't recruit from many places. Durham is not really a 'target,' but it used to have quite a bit of prestige, and there are still several top bankers and barristers that went to Durham 20-30 years ago. Durham is sort of like Dartmouth--it's a good school, but too far away from anything to really attract many recruiters.
In the London office, we recruited from Oxford, Cambridge, LSE, Imperial, and UCL. There was one kid from Birmingham, one from Bristol, none from Warwick, none from Edinburgh, none from St. Andrews, and none from Durham or York in my analyst class. There was a girl from Bocconi and one from Sciences Po (I think).
There is a difference between accepting kids from other schools, and recruiting there. In the US, recruiting involves on-campus interviews, not just a posting on the careers website. In the UK, things are a bit different, but the 5 schools I listed are 'targets' if such a thing exists at all in England.
That's not to say you can't get a job at Lazard without having attended one of those schools--you can. You may just be a little out-of-place if you lack that pedigree.
How's their culture?
Thanks for the insight, brotherbear!
What percentage of your London office comprises of LSE undergrads?
cut throat culture for Lazard boys
Talking about recent deals in M&A in SA interview (Originally Posted: 01/23/2011)
how recent does it have to be? within the last 2 days? am I able to talk about a deal that was more than a week before that's pretty big in my country's sector?
I know the details for those, but I was just wondering will some points get docked off if it's more than week ago, that's all. thanks
Would be very surprised if they detract points for giving an acquisition from +2 days ago but then again the UK deal rate is a lot lower - I would probs try and aim to cover Q4 deals as well as any ongoing discussions. Would think being able to talk sensibly and say something beyond WSJ/FT articles talk about is more important. Its probably also worth checking out Dealogic or Thomson M&A activity rates for 2010 to give your answers some context and also cover the major deals 2010 from your sector in case you need to give anecdotal evidence to broad/trend questions. I got asked this question in a FT TAS interview last year - mind went blank and had to politily decline. Got offered the job luckily, thats the Big4 for you I guess. Congrats on the interview and good luck.
Usually you want to talk about recent deals but I'm sure you can talk about a deal within the 14 days if it's that "big". The main thing they are looking for is that you know the basics of the deal and why it was intriguing to both parties. All the deals that I've talked about in my interviews have been within the last 4 days and it has worked out well.
BB M&A Assoc Interview (Originally Posted: 01/29/2011)
Hi all,
I have an interview coming up in about a week for a position as an M&A associate at a bulge bracket in NYC. I would be a lateral hire coming in from a related, but non-finance industry. I am only now starting to study up on modeling and finance concepts (luckily I have a week off from work do so) and am familiar with most of this stuff from my undergrad days.
Only one question. Do I need to know LBO modeling? This is for an M&A gig, not private equity, so I would assume the answer is no, but please correct me if this is wrong.
Thanks,
MBA_hi
It would obviously be good to know - especially because you might be selling your mandates to financial sponsors AKA private equity funds. They will want to see your model.
I woulnt worry about modeling questions. I had associate super day interviews at 5 banks and no one asked anything about modeling. The underlying finance concepts are all you need, and even these questions were a very small part of the interview.
some M&A questions (Originally Posted: 05/13/2011)
Hey guys,
I was having an interview with one European bank, and kinda wondering about some questions what the employers have asked. Questions like: could you tell me how you could go about doing M&A pro forma? what are the strengths & weaknesses of DCF analysis?
If you were me, how you guys answer these two questions? especially the first one. Thanks all!
DCF Strength - Can be sensitized at every line item - Can be performed for every level of entity (project, division, firm-wide) - Pure evaluation of cash generating ability (intrinsic vs. relative valuation) DCF Weakness - Based on revenue/expense forecast (generated by the target - biased) - Dependent on growth rate estimate (discount rate) - Sensitive to CF timing (beginning or end) - Dependent on WACC estimation (3 components - difficult for private firms) - Nominal value heavily dependent on terminal value (calculated with perpetuity or backed into with multiple approach)
Summary: - Everyone's beef is that it is dependent on so many variables and forecasts that it is a shot in the dark - Its redeeming quality is that it can be sensitized on every level to mitigate that dependence
On another note - search WSO for these answers as they have been given hundreds of times, topic posting is not a proper query method, if you need answers to questions as basic as this I suggest the WSO tech guide it's 19.99 and it is fundamentally sound
Don't forget...DCF does NOT take into account Synergies and Control Premiums when determining Enterprise Value. For this you should reference precedent transactions to get a general idea of the valuation multiples
This is incorrect, a DCF analysis is based on implied control of the target company and the enterprise value it spits out implicitly includes a control premium. Also, in an M&A setting the projections used in a DCF analyses often incorporate synergies, so synergies will be taken into account if they are embedded in the projections.
Another prior post did a good job of answering the strengths and weaknesses questions, so i wont repeat.
.
That might be the case, but you can make some basic assumptions that x% revenue synergies and x% cost synergies
M&A Inteviews coming up with case (Originally Posted: 06/14/2011)
Hey there!!
Serious help is needed!!!!
I have round 2 of interviews coming up with the M&A team of a Bulge bracket firm. I know I will have another set of interviews and the whole process will end with some sort of case to crack. Thing is, i have no idea what the case could be about so wanted your professional input on what kind of case they could give a recent grad.......
i should mention that i have no finance background whatsoever (just read the Vault guide prior to my first interviews)..so really need your kind help on this....what kind of questions will i get, will i need to calculate cash flows and value a company or should i just give strategic insights to what synergies there might be in an acquisition etc...
how would you tackle a case given to you???
i just graduated with an engineering degree and the position is as analyst for an M&A team.
appreciate this people!!!!! :)
cheers
I cannot really help you here, but I had quick question for you.
Are you interviewing for a position that would start now or next summer? If it starts now, then when did you apply for this position?
Thanks.
I doubt they will require you to have complex knowledge of finance. You did engineering, they understand that. They are looking to hire you cause they see potential. I would brush up on some valuation methods just to be safe. It wouldn't hurt to have some knowledge of financial statements and how they tie together. Just my .02
Good luck.
Dude, you might want to read up on DCF modelling, general steps in doing an lbo model, and random things like TSM (treasury stock method).
cheers guys.....appreciate your help!!!
i applied for this position about a month ago...then got a call to come to the 1st round of interviews...
a BB firm in london.....year round internship starting in fall....
M&A Experienced Hire (2nd year Associate) interview (Originally Posted: 08/22/2011)
WSO,
I work at a boutique M&A advisory. I have an M&A interview with much larger bank next week. What to expect as an experienced hire? What kind of technical questions? We are only M&A, so I did lots of DCF modeling, public and M&A comps and LOI/ NDAs. Mostly private companies.
I updated my Vault guide knowledge - what else? Any good sources of information would also be appreciated.
Thanks!
I'm sure if your technical skills are as high as you just described, you ought to be fine. I'd focus more on fit were I you, demonstrate your interest in the firm and do as much as you can to learn about the culture of the group or some of the people there as you can, be relatable and come across like someone they'd like to have in the pit next to them. Number-crunching will be a huge part, but that's a given for you already.
"Number-crunching will be a huge part, but that's a given for you already." - Exactly. Do you have any examples? This is what I am concerned about. I am a pretty good fit for them and know everything about the firm.
Thank you for your reply!
You stated them already.
-DCF modeling -walk through a LOI or NDA process -comps (i.e. "Discuss the benefits of the different comps analysis and which yields highest multiples.") -the differences between perpetual growth & exit multiple method for calculating a TV
etc.
Thanks!
No problem. Best of luck. I'm not sure how difficult it would be at the associate level, no familiarity there.
Interview Tomorrow - BB M&A (Originally Posted: 09/14/2011)
Have an interview tomorrow with a first year analyst in the M&A group of a Canadian BB. I have already reviewed all of the Q&A in the mock interview library. Very nervous about getting technical questions though. The interview is only 30mins long so how much do you think will be technical vs fit based? I have a brutal GPA and haven't done any networking at this bank so quite frankly, I'm not sure how I passed the initial screening.
Anyways, any interview tips would be greatly appreciated!
Depends if you are a good listener and if you get a question you don't know - depends how well you can highlight your strengths. From what I hear in the US, the first round is all fit. Focus on the behavioral guide.
RBC? 1st year analyst spot? Did you get it through a college resume drop?
Nope, not RBC. Canadian BB though. Submitted my application through job postings offered at a conference. Thanks for the responses.
I'm assuming BMO? Anyway, I would spend the most time reviewing the technical questions honestly. Spend time researching the company too. And don't get totally nervous if you don't know the answer to a technical question in the interview. If you are somewhat familiar, then say what you know, but if you have never heard of w/e it is, then just say 'I'm not sure about that one'. Don't BS any technicals.
If its BMO i can tell you what my superday was like. Pm me
None of the BBs are based in Canada but I know what you mean... What is your major? If it's Econ or Finance expect tech questions. If it's history or gov or something else you might not get any but the fit questions are just as important so you still have to be well prepared
PM me details of superday?
I have superdays with 2 of top 3 Guatemalan BB's next week
Thanks!
Thanks for the tips guys. It was purely fit and "what is the goal of M&A type questions". The interviewer threw in a few very basic technicals but nothing that anyone on here would have any difficulty with.
M&A Interview - All Higher Ups (Originally Posted: 09/14/2011)
I have a second/third round interview next week for a lateral analyst position within a non-BB's m&a product group. I was given my agenda for the day and was surprised to see that I am interviewing with one Associate and the rest are at the VP level and higher. Is this normal to have more higher ups than Analysts/Associates in the later stages of the interview process? I would be in the trenches with the Assoc and Analysts most of the time so I would think that they would value their input a little more...
Because most of the interviewers are higher up the ladder, excluding the associate, I would expect fewer technical questions. Is that a fair assumption?
yes, usually, although the associate may be instructed to focus only on technical questions and grill you. have fun!
Analysts interview you in earlier stages typically to test your intellectual fit. Later rounds tend to be heavily weighted with MDs and VPs to judge your character. You have to remember that analysts are on the bottom of the totem pole in banking. Ideally, you would think that analysts should be the one's judging fit since we spend the most time together in the bull pen. However, the cycle of analysts being considered worth nothing except our ability to pound out work makes our opinion beyond intellectual capability worthless.
Agree with everything said above. VPs may ask some technical questions, but for the most part, higher up interviews will be geared towards judging character, motives, and ability to speak intelligently about the industry. Be prepared to talk about your experience, career goals, why you want "this firm," they'll ask you about previous deals, especially if they are similar to what that group does, etc. If you do have experience with that product, be prepared to have the nitty gritty details ready, but also have a couple points prepared to talk about strategy and your view on execution. Chances are, the VP / MD will know something about the deal and will want to know how you thought it went. And if technical questions come from the VP or MD, it will generally be in this discussion in the context of the deal.
Good luck
So you've made it past the initial hurdles well so far, which means you're a pretty smart guy and have convinced the VPs and MDs that your worth your shit... and their time. In my experience, very similar to your except for the lateral part, there will be more fit/attitude/life goals questions, in which case your responses should be an honest portrayal of who you are + the occasional "banking is my life" line. That's what I used, albeit, I actually do feel that way, so the interview went pretty smoothly. You're more than halfway there I think, don't fuck it up! Kidding, you'll be fine, just be confident and believe that you've already gotten the job, this is almost like a reaffirmation for them. Good luck!
Should I know LBO for M&A interview? (Originally Posted: 02/09/2012)
I will be having an interview with a M&A team.
Am I expected to know about LBO? I am not sure if LBO will be tested in M&A interviews. It sounds to me only PE shop ask LBO questions. Correct me if I am wrong.
Any input will be appreciated.
Is this SA or FT?
Know the basics of a LBO, especially if you have finance background.
know the basics of an lbo since it's one of the methodologies to figure out a floor valuation for a target company. you may or may not get asked about an lbo, depending on your background and work experience, but leave nothing to chance.
Here's a sample question you may get that's a little more than just the standard M&I guide stuff:
I'm going to LBO Company Alpha:
EBIT = 10 Entry EBIT Mulitple = 10x 80% Debt 20% Equity
Require Cash Turn = 3x
Exit 5 yrs later
EBIT = 14 Exit = Entry multiple
How much debt do I need to paydown to achieve my required cash turn?
This is a pretty simple question, but you'd need to know the basics of an LBO.
This is the book I used. It goes through a case and focuses on the fundamentals. should be all you need for an interview..
http://www.amazon.com/Leveraged-Buyots-Practical-Introductory-Guide/dp/…
Good luck bro. Coming up aces.
M&A Question. Need help for interview (Originally Posted: 03/14/2012)
Guys a friend of mine received this question in his M&A interview at a bulge-bracket.
'would a company prefer concentrated or scattered ownership'.
What is the correct answer to this question as I have no idea and have an interview tomorrow at same bulge-bracket.
If someone could answer it would be great.
Sit harum tempore modi ea. Quia nesciunt iusto repellendus cumque expedita. Delectus incidunt vel possimus et alias rerum totam. Consequatur non commodi voluptas repellat autem voluptatum.
Eius suscipit iusto voluptas ipsam architecto. Perferendis hic illo qui. Sit aut consequatur animi quam.
Sunt ullam ab consequuntur. Repudiandae dolores suscipit minima et. Quo deserunt possimus omnis natus.
Quia velit voluptatibus aut delectus. Eum explicabo doloribus perspiciatis soluta. Modi repellendus reiciendis quidem autem. Consequatur deserunt sunt sint ea. Aut assumenda quod incidunt necessitatibus in.
See All Comments - 100% Free
WSO depends on everyone being able to pitch in when they know something. Unlock with your email and get bonus: 6 financial modeling lessons free ($199 value)
or Unlock with your social account...
Suscipit aspernatur ut ut laboriosam odit maiores quia. Consectetur eos quae minima facilis. Vel dolorem suscipit itaque dolorem voluptatem quisquam. Ut at itaque animi vel quae voluptas et. Possimus natus aperiam ex minus nulla.
Culpa et soluta cumque pariatur illo nihil labore. Eaque quis ipsa maiores aut ipsum itaque. Tempore voluptatem ad sed officia minima. Ut tempora corrupti non omnis illo. Temporibus assumenda hic quia sit tenetur velit dolor.
Aliquam inventore ut debitis dignissimos alias voluptatem. Et eum temporibus esse ipsam et itaque pariatur amet. Quis a nostrum soluta voluptas. Nemo porro ut est sed repudiandae. Numquam esse id soluta similique sint. Quia et deleniti dignissimos consectetur tenetur.
Beatae illum officiis deleniti. Consectetur necessitatibus repudiandae autem aliquam unde dolor beatae. Illum nemo alias et sint. Tempora officiis dolor sit error totam qui molestiae. Sunt est voluptatum eius facere unde odio. Et quia aspernatur officiis accusantium aut.
Doloribus autem omnis corporis labore dolorum. Rerum a eos aliquam nostrum. Officia quia molestias eos possimus eligendi. Voluptate ducimus ea animi voluptas sed delectus. Incidunt dicta amet sunt id.
Quas itaque quam et at quo iure. Voluptatem voluptatem ut deserunt dolore enim quibusdam dolores. Alias dolorem tenetur facilis. Soluta velit fugiat quas debitis. Nesciunt dolor dolore id quisquam rem omnis.
Mollitia quaerat explicabo quas ab dolorem harum. Ipsam est et iure aliquid velit eum. Quaerat debitis aut et et esse a. Tenetur voluptatibus quae ut minus. Aut nobis autem vel saepe minima. Voluptatum hic officiis laboriosam.
Cumque quia adipisci blanditiis quia. Optio qui in sed. Quis tenetur expedita et nulla. Dolorem vel nihil reiciendis. Illo molestiae asperiores quibusdam voluptas nulla occaecati. Voluptatem illo minima eligendi error numquam quia animi. Autem error harum ipsa et aut.
Aliquam distinctio sed dignissimos tenetur aut culpa doloribus. Ad quaerat in reprehenderit atque est quia vel ratione. Rerum distinctio similique rerum ipsum amet. Voluptas esse ut non accusantium officia.
Quaerat rerum non vero. Animi maiores nihil aut laboriosam.
Aut voluptates fugit error ullam. Ipsum repellendus eos velit ipsam. Libero aut eaque vel optio porro quos aut. Veniam enim aut consequatur et unde.
Corporis magnam et facilis similique et nisi. Consequatur qui enim voluptatem sed molestiae nulla accusantium est. Quasi eum natus commodi repellendus nemo omnis officiis. Voluptates omnis qui iste esse cupiditate fugiat aliquid. Nulla aspernatur delectus quia.
Ad velit sed voluptatem qui sed et at. Ut consequatur odit sed. Sapiente dolores at inventore cupiditate excepturi. Iusto possimus qui earum minima qui non sequi.
Qui quaerat cumque distinctio qui voluptatibus. Mollitia corrupti eos corporis neque facilis eum. Rerum dolorum labore molestias tenetur. Nobis eveniet qui asperiores amet voluptas ducimus consequatur.
Et voluptatibus deleniti molestiae modi rerum qui. Qui quas et magni officia sit quia eaque perferendis. Quo excepturi ut velit non. Officiis sed voluptas velit.
Et iusto repudiandae nam dolore fuga sed quibusdam. Nulla et asperiores ea ipsa eius dolores. Impedit sit quidem dolor dicta minima occaecati magnam. Illo et ea a optio.
Quam nostrum et adipisci magni. Magnam aliquam minima error. Non dolore ut qui dolorem voluptas corrupti tempore.
Voluptatibus et corrupti sit omnis consequatur quasi. Blanditiis accusamus voluptatem odio ad ducimus dolores praesentium perferendis. Quidem dolorem molestias est distinctio voluptate. Facilis impedit assumenda reprehenderit eum et totam velit. Accusamus fugiat similique quis itaque.
Iusto voluptatem voluptatibus rerum aperiam rerum dolores. Facilis perferendis debitis repudiandae voluptatem iusto. Dolor velit dolor aliquid voluptatum. Qui dolorem eos nihil voluptate. Natus recusandae qui modi aliquam eligendi totam. Totam temporibus vel cum amet magnam eaque.
Non reiciendis atque ipsum reiciendis. Ad dolor ullam excepturi. Tempora repellat sint itaque recusandae. Pariatur enim sint incidunt autem fugiat quae.
Dolore eaque ut numquam. Ut aut laborum laborum et rem neque excepturi magni.
Voluptatem occaecati magnam eius. Est molestiae ab soluta deleniti. Facilis esse ipsa autem quia earum dolorem. Omnis aperiam magni sit et laborum qui magnam. Nihil aut consequatur sint ut. Non nulla maxime eos cupiditate facilis quo accusamus. Eveniet porro aliquam repudiandae quam placeat corrupti quasi sed.
Quia ratione animi a aliquam quibusdam quia asperiores in. At ea vitae officiis. Laboriosam qui maiores omnis at voluptatem eius. Odio nisi nulla est eveniet amet vel fugiat doloribus.
Est velit earum nihil praesentium maxime sint. Ut accusantium tempore ut quisquam tempora voluptatum impedit. Velit et doloribus ut voluptas aut.
Amet enim aut tenetur quia ipsam. Est blanditiis labore veniam maxime totam voluptas. Mollitia distinctio ipsam neque omnis iure. Ullam iste quae temporibus eligendi voluptatem et qui est.
Nemo et corrupti voluptatibus odit molestias. Cumque inventore sint atque sed facilis laborum. Iste officiis neque sapiente omnis consequatur quisquam nemo iste. Eum nostrum et et est consequatur.
Tempora dolorem dolorem commodi minus fuga non harum. Odit quisquam voluptatem fuga excepturi. Quasi dignissimos maxime harum eius ut. Soluta quam voluptas voluptas qui quidem. Quisquam qui et vero alias qui amet voluptatem fugiat.
Soluta nobis ut ex. Blanditiis ipsam soluta nisi facere veritatis. Corrupti nihil maxime minima consequatur sunt dolor. Et delectus et voluptatem qui dolorem quod doloremque et.
Vel quos magni ullam dolor quas natus nesciunt. Et suscipit accusantium quaerat veniam non sit. Quas pariatur numquam quam perspiciatis. Sapiente nihil et unde molestiae dolore.